Project Name		Configuration Instruction	No.	Functions Description
The Department of Detection & Measurement distribution series	Front printing variable code detection station	Exclusive German Imported color C4K CCD camera	1	conventional printing defects die cut offset hot gold hot silver bias, missing two-dimensional code detection
		Imported optical imaging lens	1
		Dedicated dome light source, length 525mm.	1
		High-speed image processing computer workstation (including high-speed image acquisition and processing card)	1
	Positive Pressing Varnish Inspection Station	Imported from England E2V high-speed 8K pixel line scan camera	1	Varnish deviation, missing convex oil deviation, missing embossed offset
		Imported optical imaging lens	1
		Dedicated oblique light source, the length of 525mm	1
		High-speed image processing computer workstation (including high-speed image acquisition and processing card)	1
	Positive film embossing detection station	Imported from England E2V high-speed 8K pixel line scan camera	1	film defects Varnish defects
		Imported optical imaging lens	1
		Dedicated reflective light source, the length of 570mm	1
		High-speed image processing computer workstation (including high-speed image acquisition and processing card)	1
	Reverse detection station	Imported high-speed full-color 4kCCD camera	1	dead insects reverse dirty
		Imported optical imaging lens	1
		Special light source, length of 525mm.	1
		High-speed image processing computer workstation (including high-speed image acquisition and processing card)	1
	Surface array	Face array camera and lens	1	two-dimensional code detection re-code, wrong code, missing code
	Surface array	Special surface array light source	1
	Detect software configuration	Print Inspection Module for Visual Inspection Software FSCheck V2.0	1
		Two-dimensional code detection module	1	Detection of re-code, error code, missing code
		Defect Detection Statistical Report	1	The defects can be detected in the statistical type, data and other information
	Detection equipment	Dedicated printing detecting dust sealed cabinet	1	Protection of detection devices from dust
		Industrial refrigeration and air conditioning	2	Protection of detection devices from process heat
		22 inch LCD monitor and keyboard and mouse	1
		Sound and light alarm device	1	Sound and light alarm when Error occurs
		Rear Monitor	1
Mechanical platform	Mechanical transmission platform structure configuration	Friction feeder	1
		Suction Feeder	1
		Mix Feeder	1
		Note: film and water-based varnish and other easy to scratch the sample is not within the scope of friction technology
		Air blower	1	Remove paper wool, to avoid false inspection
		Goods delivery structure	1	RFish Scale ☐Vertical paper pick-up
		Waste collection Unit	1	☐Single Rejection ☐Double Rejection
		High-speed pneumatic reject mechanism	1	RAir Rejection ☐Blow Rejection ☐Air + Blow
		Electrical supporting system	1	Standardize operation
	Strong electric part of the mechanical platform	Germany SEW main motor	1	4KW supply main drive power
		Germany SEW paper feed motor	1	1.5KW supply feeding transmission power
		Air pump	1	2 sets of 4KW
		Delivery Unit motor	1	0.4KW
		Rejection Unit motor	1	0.4KW
		Vibration motor	1	0.04KW

Note 1: This transmission system requires the user to provide centralized plant air or external air compressor for the device to remove the waste.

Device functions parameters

Project	Function Parameter
Maximum detention speed	220 m / min 180 m / min
Detection Area	480mm
Maximum paper size	Friction	480mm (Width) * 420mm (Length)
	Suction	480mm (Width) * 420mm (length)
Minimum paper size	Friction	90mm (width) * 90mm (length)
	Suction	90mm (width) * 120mm (length)
Paper adaptability	90 ~ 350g / ㎡ (on the suction paper weight is greater than 195g)
Max Detection accuracy (mm)	Positive imaging accuracy (direct station): 0.117mm * 0.12mm (4K camera) Positive imaging accuracy (oblique station): 0.058mm * 0.12mm (8K camera) Positive imaging accuracy (reflection station): 0.058mm * 0.12mm (8K camera) ) 220m / min Negative imaging accuracy (reverse side): 0.14mm * 0.24mm (4K camera) Face array imaging accuracy (area array): 0.067mm * 0.067mm
Min Detection accuracy (mm)	Positive imaging accuracy (direct station): 0.117mm * 0.1mm (4K camera) Positive imaging accuracy (oblique station): 0.058mm * 0.1mm (8K camera) Positive imaging accuracy (reflection station): 0.058mm * 0.1mm (8K camera) ) 180m / min Negative imaging accuracy (reverse side): 0.14mm * 0.2mm (4K camera) Face array imaging accuracy (area array): 0.067mm * 0.067mm
Conventional defect detection (when defect contrast is greater than 40)	Leakage, dirty spots and other defects Minimum detection area: front ≥ 0.15 mm²; Overprint deviation detection: ≥ 0.15mm Die-cutting deviation detection: ≥ 0.15mm Pull line: can detect the width of more than vertical 0.15mm wide, or horizontal 0.2mm wide, length greater than 15mm, contrast greater than 40 horizontal or vertical cable; Local chromatic aberration detection ΔE≥3ΔELab
Bar code detection	decoding type: QR code two-dimensional code error correction rate of not less than 15% detection error code, re-code, missing code; the size of two-dimensional code / (21 + (version number -1) * 4) ≥ 0.38: two-dimensional code detection does not have the product phase detection function;
Variable code detection (face array)	De-coding type: QR code detection error code, re-code, missing code; De-coding size: ≥ 8mm * 8mm (version is not higher than 6, error correction rate of not less than 15%); Two-dimensional code detection does not have the product phase detection function; Character reading> = 5 pounds, Document / Pharma font, non-dotted consecutive characters between the words without adhesion, Supports single and double line, alphabetic, numeric or alphanumeric characters; (Face array imaging one-dimensional code, two-dimensional code, characters, the need to 80mm * 60mm range)

Machine parameters

Platform configuration description (Pre-accelerated detection, tick waste, fish scales transmission three sets of standard, this form omitted)	Machine dimensions (Only host, not including strong cabinet, wind cabinet, test cabinet) Length × width × height (mm)	Equipment area (Only host, not including strong cabinet, wind cabinet, test cabinet) Length × width (mm)	Machine weight (tons)	Machine power KW
Friction feeder + Single rejection + Fish Scale delivery	6500 × 1700 × 2000	6500 × 3200	3	16
Friction feeder + Double rejection + Fish Scale delivery	8000 × 1700 × 2000	8000 × 3200	3.5	17
Friction feeder + Single rejection + Vertical delivery	7500×1700×2000	7500×3200	3.3	17
Friction feeder + Double rejection + Vertical delivery	9000×1700×2000	9000×3200	3.8	18
Suction feeder + Single rejection + Fish Scale delivery	6500×2550×2300	7300×3400	3.5	18
Suction feeder + Double rejection + Fish Scale delivery	8000×2550×2300	8800×3400	4	19
Suction feeder + Single rejection + Vertical delivery	7500×2550×2300	8300×3400	3.8	19
Suction feeder + Double rejection + Verticle delivery	9000×2550×2300	9800×3400	4.3	20
Mixed feeder + Single rejection + Fish Scale delivery	6500×2550×2300	7300×3400	3.5	19
Mixed feeder + Double rejection + Fish Scale delivery	8000×2550×2300	8800×3400	4	20
Mixed feeder + Single rejection + Vertical delivery	7500×2550×2300	8300×3400	3.8	20
Mixed feeder + Double rejection + Vertical delivery	9000×2550×2300	9800×3400	4.3	21

Accessories & Service with equipment:-

during the warranty period and the warranty period we provide 24 hours of telephone service;
the production base in Changzhou, the number of 200 factories, services, faster response; 45 or so professional team, for customers to provide technical support to ensure that within 12 hours to reach the scene;
to provide remote network software fault maintenance and remote network modeling;
to provide a set of backup hard disk, if the IPC hard drive failure, the customer can immediately arrange the field operator to replace the whole,
Our after-sales service staff to the scene after the diagnosis and maintenance, and then fill the relevant accessories to ensure that the customer's production will not be affected;

Installation requirements
1. Unloading the first crane or forklift with the equipment from the truck unloaded, and then open the wooden box, be careful not to damage the shell;
2. equipment can be used to move the overall forklift truck.

When using the overall handling, please use 3 tons and 3 tons or more forklift;
When the parts are disintegrated, please use at least 2 tons and more than 2 tons forklift:

equipment around at least 500mm personnel channel;
centralized gas supply or external air compressor, trachea diameter of at least 12mm, the output stability> 0.8Mpa pressure, 400mm width, 300g / ㎡ above the color box to be discarded output stability> 1Mpa pressure;
machine with 3-phase 5-wire 380V / 50 / 60HZ power supply, the machine needs to ground, the total power of 15KW;
Line requirements: greater than or equal to 10 square millimeters copper core cable.
Use a circuit breaker greater than or equal to 60, and the inverter has high harmonics without the need for a secondary protector.

Chewing Gum Box Inspection Machine 400GSM Paper 4K CCD camera

Focusight Inspection Machine

Printing Inspection Machine

Label Inspection Machine

Carton Inspection Machine

Packaging Inspection Equipment

Electronic Inspection Equipment

Quality Control Vision Systems

Packaging Vision Systems

Machine Vision Inspection Systems

Automated Visual Inspection Equipment

Surface Detection Equipment

Chewing Gum Box Inspection Machine 400GSM Paper 4K CCD camera

digital inspection camera

cam blister machine

screen capture recorder